Home - Call Station

• Consists of 1 component
• Can be programmed using the VT3000 Core Software
• Alarms can be setup as Dual State, Tri-State, or Disabled
• Available as 110vac Powered or C-Cell Battery Powered

Requirements

• Mounting location free of metal enclosers.
• (1) 110v power outlets within 6 feet of module placement/location.
• Mounting location within 100’ of the Computer/Server, Repeater or Other Device.
• Ensure the device is mounted in an easily accessible location.

Specifications

• Dimensions - 5” (W) x 7” (L) x 2.5” (H)
• (1) 6’ Power Cord attached

Requirements

• Mounting location free of metal enclosers.
• (1) 110v power outlets within 6 feet of module placement/location.
• Mounting location within 100’ of the Computer/Server or Repeater.
  • Battery Powered Call Stations, use sleep mode to conserve power and do NOT network with one another.
• Ensure the device is mounted in an easily accessible location.

Specifications

• Dimensions - 5” (W) x 7” (L) x 2.5” (H)
• (2) 6’ C-Cell Batteries

Instructions on Installing a Battery Powered Call Station

Instructions on Installing a Powered (110vac) Call Station

Configuration - Alarms

Create a New Call Station Configuration to your system

Copy/Duplicate an Existing Call Station Configuration

Configuration - Update

Send a Configuration (New or Update) to a Battery Powered Call Station

Update/Send a Configuration to a Powered (110vac) Call Station

Light Stack Attachment

Attach a Physical Light Stack to a Call Station

Setup & Configure an Attached Light Stack

Setup & Configure the use of an Attached Light Stack

Firware

Update the Firmware on a Battery Powered Call Station - Wirelessly

Update the Firmware on a Powered (110vac) Call Station - Wirelessly

Update the Firmware on a Call Station using the Micro SD Card on the Device

Signal Strength

Test the Signal Strength (Mesh Signal) on a Battery Powered Call Station

Test the Signal Strength (Mesh Signal) on a Powered (110vac) Call Station

Isolation Code - ISO

Change the ISO (Isolation) Code on a Call Station using Buttons 1 - 4

Change the ISO (Isolation) Code on a Call Station using Device Status - Wirelessly

Change the ISO (Isolation) Code on a Call Station using the Micro SD Card on the Device

Type Subject or Key Word to Query Archives

---