Home - Paging Transmitter
Jump to navigation
Jump to search
|
|
|
- A Paging Transmitter is a device that sends text messages to Pagers.
- Handheld Pagers or Pager Watches
- This device can be connected to the Computer/Server via USB port or over an Ethernet connection.
- This device communicates with Pagers over a 400MHz band.
- Text Messages can only be received on VersaCall Pagers & Pager Watches.
USB Connected
Requirements
- 110v power outlet within 6 feet of placement/location.
- Control Unit within 6 feet of placement/location.
- Mounting location free of Metal Enclosures.
Specifications
- Dimensions – 3.25” (W) x 5.25” (L) x 1.125” (H)
- (1) 6’ Power Cord (included)
- (1) 6’ USB Cord (included)
- (1) 7” Antenna (included)
Remote - RS-232 Connected
Requirements
- (2) 110v power outlets within 6 feet of placement/location (Transmitter & RS-232).
- Transmitter & RS-232 within 6 feet of each other.
- Mounting location free of Metal Enclosures.
- Ethernet port near the placement/location of the RS-232.
- RS-232 will need to be assigned a Static IP Address or a DHCP Reserved address.
Specifications
- Transmitter Dimensions – 3.25” (W) x 5.25” (L) x 1.125” (H)
- RS-232 Dimensions - s" (W) x 3.25" (L) x .75" (H)
- (2) 6’ Power Cords (included)
- (1) 6’ Serial Cable (included)
- (1) 7” Antenna (included)
- (1) Ethernet Cable (not included)
- Instructions on Installing a USB type Paging Transmitter
- Instructions on Installing an Ethernet/Remote Paging Transmitter where the Transmitter & Computer/Server are on the Same Subnet
- Instructions on Installing an Ethernet/Remote Paging Transmitter where the Transmitter & Computer/Server are on Different Subnets
Transmitter Information
Handheld Pager Information
| Type Subject or Key Word to Query Archives |
|---|
|
|