VT3000 - Install Wireless Tone Audio Module

---

---

Overview A Wireless Audio Module is used to play Tones when specific conditions are met. This module consists of 2 parts, the Speaker (with Mount) & the I/O module. This guide will explain how to install the device and configure it.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. Coordinator connected and communicating with your VersaCall system. 3. Available 110VAC outlet at the Audio Module mounting location. 4. Wireless Audio Module. 5. Audio Module Configuration setup in the VT3000 Software

Hardware Components

---

---

Step 1. Mount Module within 6 feet of electrical outlet.

---

Step 2. Plug in the power cord to the electrical outlet.

---

Step 3. Look at the bottom of the Audio Module - make note of the Mesh Address.

---

Step 4. Open VT3000 Core Software select Diagnostics - select Device Status.

---

Step 5. Find the Audio Module's Mesh Address in the Address field - select Options link on the right.

---

Step 6. Select Configuration.Look at the bottom of the Repeater - make note of the Mesh Address.

---

Step 7. Select a Device Configuration from the New Configuration field - select Update Configuration button.

---

---

Select a Guide Here Instructions on Installing a Wireless Audio Module (MP3) Add a Wireless Audio Module (MP3) Configuration to VT3000 Core Software] Instructions on Replacing the MP3 Files/Songs on the Wireless Audio Module (MP3) Add a Wireless Audio Module (Tone) Configuration to VT3000 Core Software Instructions on Changing the Tone/Melodies from Default Instructions on Adjusting the Tone/Melody Volume Instructions on Configuring Devices to Play a Melody on a Wireless Audio Module (Tone/MP3)

---

---