Transition
|
Use this type of input when setting up a switch - generally used to signal a machine is down.
|
|
Type - select Transition.
|
Enabled - select if the input is to always be active - generally this will be unchecked as we will use Actions to manipulate when the input should be active or inactive. When using a Switch Contact Module, the input will always have to be enabled.
|
Inverted - select if the input is to behave opposite of default.
|
On Delay - enter the amount of milliseconds to elapse before the input turns on.
|
Off Delay - enter the amount of milliseconds to elapse before the input turns off.
|
Linked To - use this to select the Alarm to be triggered when the input is activated.
|