Difference between revisions of "VT3000 - Windows Firewall (Configuration)"
Jump to navigation
Jump to search
SupportAdmin (talk | contribs) |
SupportAdmin (talk | contribs) m (SupportAdmin moved page Configure Windows Firewall - (VT3000) to VT3000 - Windows Firewall (Configuration) without leaving a redirect) |
(No difference)
| |
Revision as of 20:13, 3 August 2017
If the IP address of the VT3000 Control Unit fails to bring up the Welcome page, you may have a firewall issue. Before proceeding with the guide, ensure the VersaCall computer/server is powered and running. You will need direct access to the VersaCall computer/server to complete the guide.
1. Select the Windows Start button – select Control Panel.
2. Select the Windows Firewall icon or select System and Security then select the Windows Firewall icon.
- 
3. Select Allow program or feature through Windows Firewall.
4. Select Change Settings – scroll down to the bottom of the list - mark the boxes for World Wide Web Services (HTTP) - select OK.
5. Close all open windows - attempt the VT3000 log in from another computer.