VPIV Incidents Tag

From Versacall Support
Revision as of 20:03, 16 November 2017 by SupportAdmin (talk | contribs)
Jump to navigation Jump to search

Number of Incidents Tag

This tag is used to tally up the number of times a monitoring point has been activated.


Name & Functionality

Incidents1.png

1. Name - enter a name.

2. Functionality - select Number of Incidents.


Time Settings - Current Shift

TimeShift.png

1. Active Only - select to only show current active time.

2. Time Period - select Current Shift.

3. Schedule - select the appropriate schedule containing the shift times.

4. Data Range - there are 6 options. 

    a. Current Day - show number of incidents for the current day.
    b. Current Week - show number of incidents for the current week.
    c. Current Month - show number of incidents for the current month.
    d. Day Span - enter the From and To day range.
    e. Week Span - enter the From and To week range.
    f. Month Span - enter the From and To month range.


Time Settings - 24 Hour

Time24.png

1. Active Only - not available for Number of Incidents.

2. Time Period - select 24 Hour.

3. Schedule - select the appropriate schedule containing the shift times.

4. Data Range - there are 6 options. 

    a. Current Day - show number of incidents for the current day.
    b. Current Week - show number of incidents for the current week.
    c. Current Month - show number of incidents for the current month.
    d. Day Span - enter the From and To day range.
    e. Week Span - enter the From and To week range.
    f. Month Span - enter the From and To month range.


Time Settings - Specific Shift

TimeSpecific.png

1. Active Only - not available for Number of Incidents.

2. Time Period - select Specific Shift.

3. Schedule - select the appropriate schedule containing the shift times.

4. Shift - select the appropriate shift based on the selected schedule

5. Data Range - there are 6 options. 

    a. Current Day - show number of incidents for the current day.
    b. Current Week - show number of incidents for the current week.
    c. Current Month - show number of incidents for the current month.
    d. Day Span - enter the From and To day range.
    e. Week Span - enter the From and To week range.
    f. Month Span - enter the From and To month range.


Time Settings - Span

TimeSpan.png

1. Active Only - not available for Number of Incidents.

2. Time Period - select Span.

3. From - enter the number of seconds to go back to start the span.

4. To - enter the number of second to go back to the end of the span.

4. Schedule - select the appropriate schedule.


Time Options

VPIVOverlap.png

1. Exclude Overlap - select to omit all overlapping time from anywhere.

2. All Time - select to include all time regardless of shift configuration.

3. Shift Time - select to include all shift time regardless of breaks.

4. Shift/Non-Break Time - select to include all shift time without break time.


Data Source - Monitoring Point

DataMonitor.png

1. Data Source - select Monitoring Point.

2. Device - select the Device configured with the monitoring point.

3. Monitoring Point - select the monitoring point to gather incident data from.


Data Source - Filter Group

VPIVDataFilter.png

1. Data Source - select Filter Group.

2. Group - select the filter group to gather incident data from.


Data Source - Device

DataDevice.png

1. Data Source - select Device.

2. Device - select the device to gather incident data from.


Result - Integer

ResultInteger.png

1. Result - select Integer - the number of incidents is always a whole number.

Retrieved from "http://support.versacall.com/index.php?title=VPIV_Incidents_Tag&oldid=2548"