VT3000 - Install MP3 Audio Module

Overview

If you have purchased a new MP3 Audio Module for your existing system please follow the steps below. If this is a new system, please ensure that you have the control unit installed with the coordinator operating normally.

Unpack

You will have the following components after unpacking:

• 

  IO Module

• 

  Speaker

• 

  Speaker Power Cord

• 

  Speaker Mount

Instructions

Select EXPAND to view an Animated Graphic for the step.

Step 1: Mount Module within 6 feet of electrical outlet.

Step 2: Mount speaker mount within 6 feet of an electrical outlet and within 6 feet of the IO Module.

Step 3: On the backside of the Speaker, plug in the female end of the power cord.

Step 4: On the backside of the Speaker, plug in the audio connector from the IO Module.

Step 5: Plug the 3 prong connector (Speaker Power Cord) into the female connection on the IO Module. Plug the 3 prong connector on the IO module into an electrical outlet.

Step 6: Plug the power cord from the IO module into an electrical outlet.

Step 7: Note the Mesh Address on the IO Module.

Step 8: Open VT3000 Core Software go to Diagnostics - Device Status.

Step 9: Find the Audio Device Mesh Address in the Address field - select Options link on the right.

Step 10: Select a Device Configuration from the New Configuration field - select Update Configuration button.

Step by Step Guides

Click Here for a guide on adding and updating a configuration for an MP3 Audio Module.

Having Trouble?

• 

  Submit a Service Ticket