VT3000 - Install Standard PC
Revision as of 20:48, 14 February 2019 by SupportAdmin (talk | contribs)
Overview
All New Systems come with a computer or control unit that contains the VersaCall software. The instructions below are for a Standard Control Unit, if you purchases a 2-Way Radio unit you most likely recieved this type of control unit. Follow the instructions below to install properly.
Unpack
You will have the following components after unpacking.
Instructions
Select EXPAND to view an Animated Graphic for the step.
Step 1: Attach a Monitor (not included) to the Control Unit using the DVI or HDMI port. |
![]() |
Step 2: Attach a Keyboard & Mouse (not included) to the Control Unit using the USB or PS/2 ports. |
![]() |
Step 3: If the unit is going on your network, attach an ethernet cable to the ethernet port. |
![]() |
Step 4: Plug the Power Adapter into the power port. Connect the Power Adapter to Power Cord. |
![]() |
Step 5: Press the Power Button (front). |
![]() |
Step 6: After the computer boots - select "Your Company Name" as the user - select the Chrome icon from Windows Desktop. |
![]() |
Step 7: Type "localhost" in the address bar - select VT3000 button on welcome page. |
![]() |
Step 8: Enter "admin" for User Name & Password - select Login button. |
![]() |
Step by Step Guides
Click Here for a guide on IT Considerations.
Click Here for a guide on Pre-Requisites for software installation.
Click Here for a guide on setting a Static IP Address on a control unit.
Click Here for a guide on setting up Remote Desktop before logging into the VC server.