VPIV - Create/Edit Rotating Panels

• 
• 
• 

---

Create/Edit Rotating Panels

Rotating panels are used when you want to view multiple panels on one monitor. Each panel will appear on the screen for a set amount of time then the next panel will show for a set amount of time. This helps when faced with having too many cells/objects on one panel to make is easy to read.

Requirements

1. Create at least 2 Panels of any type.

Instructions - Create a Rotating Panel

1. Open the VT3000 web interface - select VP IV - select Rotating Panels icon.

• 

• 

2. Click on the Add button.

• 

3. Following options are available:

• 

    a. Rotating Panel Name - enter a name for this set of panels.
    b. Rotating Panel List - use this section to select panels and enter duration times (seconds).
         i. Panel - click on the down arrow to select a panel.
         ii. Duration - enter a number of seconds for the panel to appear on the monitor.
         iii. Add - click on the Add button once the panel is selected and duration is entered.

4. A new line will appear under the last panel that was added. Repeat the process from above to add more panels to the rotation.

• 

• 

5. Once all panels have been added to the rotation, click on the Save & Exit button under the Rotation Panel Name.

• 

Instructions - Edit a Rotating Panel

Generally editing is used to alter the duration, but you can also change the panels being viewed.

1. Open the VT3000 web interface - select VP IV - select Rotating Panels icon.

• 

• 

2. Select a Rotating Panel from the list so that it is highlighted.

• 

3. Click on the Edit button at the bottom of the list.

• 

4. On the Edit Rotating Panel screen you will see the same options available from the Adding/Creating section.

• 

• 

• 

    a. Rotating Panel Name - delete the old name and enter a new one.
    b. Rotating Panel List - all the panel previously added will be listed.
         i. Edit - click on the Edit link inline with the panel name to change it.
              1. Panel - select a different panel to display.
              2. Duration - enter a new duration time.
         ii. Update - click on the Update link inline with the panel name to save changes.
         iii. Add - add an additional panel to the existing rotation. Instructions are the same as Adding/Creating.

5. Once all panels, in the rotation, have been edited - click on the Save & Exit button under the Rotation Panel Name.

• 

Having Trouble?

• 

  Submit a Service Ticket