VT3000 - Install Rack Mount PC

Overview All New Systems come with a computer or control unit that contains the VersaCall software. If your company provided the PC or Server then you will need to speak with your IT department to determine where that hardware is located/installed. The instructions below are for a Server Control Unit, if this is the type of Control Unit you have purchased please proceed with the steps below.

Hardware Components Server Unit Power Cord

Instructions

Step 1. Attach a Monitor (not included) to the Control Unit using the DVI or HDMI port.

---

Step 2. Attach a Keyboard & Mouse (not included) to the Control Unit using the USB or PS/2 ports.

---

Step 3. If the unit is going on your network, attach an ethernet cable to the ethernet port.

---

Step 4. Plug the Power Adapter into the power port. Connect the Power Adapter to Power Cord.

---

Step 5. Turn on the power in the back of the Server. Rotate to the front - open the protector door on the right. Press the Power Button (front).

---

Step 6. After the computer boots - select "Your Company Name" as the user - select the Chrome icon from Windows Desktop.

---

Step 7. Type "localhost" in the address bar - select VT3000 button on welcome page.

---

Step 8. Enter "admin" for User Name & Password - select Login button.

---

---

Related - Step by Step Guides System Layout for IT Considerations/Information Purposes Minimum Requirements - Customer Providing the Computer or Server VersaCall Software Installation Pre-Requisites Installation Instructions for Mini PC Provided by VersaCall Installation Instructions for Standard PC Provided by VersaCall	Additional Help Submit a Ticket - https://www.versacall.com/customer-support/service-ticket Training Videos - https://www.versacall.com/training