VPIV Incidents Tag
Revision as of 22:56, 8 March 2022 by SupportAdmin (talk | contribs)
|
|
Name & Functionality
1. Name - enter a name. 2. Functionality - select Number of Incidents.
Time Settings - Current Shift
1. Time Period - select Current Shift. 2. Schedule - select the appropriate schedule containing the shift times. 3. Data Range - there are 6 options. a. Current Day - show number of incidents for the current day. b. Current Week - show number of incidents for the current week. c. Current Month - show number of incidents for the current month. d. Day Span - enter the From and To day range. e. Week Span - enter the From and To week range. f. Month Span - enter the From and To month range.
Time Settings - 24 Hour
1. Active Only - not available for Number of Incidents. 2. Time Period - select 24 Hour. 3. Schedule - select the appropriate schedule containing the shift times. 4. Data Range - there are 6 options. a. Current Day - show number of incidents for the current day. b. Current Week - show number of incidents for the current week. c. Current Month - show number of incidents for the current month. d. Day Span - enter the From and To day range. e. Week Span - enter the From and To week range. f. Month Span - enter the From and To month range.
Time Settings - Specific Shift
1. Active Only - not available for Number of Incidents. 2. Time Period - select Specific Shift. 3. Schedule - select the appropriate schedule containing the shift times. 4. Shift - select the appropriate shift based on the selected schedule 5. Data Range - there are 6 options. a. Current Day - show number of incidents for the current day. b. Current Week - show number of incidents for the current week. c. Current Month - show number of incidents for the current month. d. Day Span - enter the From and To day range. e. Week Span - enter the From and To week range. f. Month Span - enter the From and To month range.
Time Settings - Span
1. Active Only - not available for Number of Incidents. 2. Time Period - select Span. 3. From - enter the number of seconds to go back to start the span. 4. To - enter the number of second to go back to the end of the span. 5. Schedule - select the appropriate schedule.
Data Source - Monitoring Point
1. Data Source - select Monitoring Point. 2. Device - select the Device configured with the monitoring point. 3. Monitoring Point - select the monitoring point to gather incident data from.
Data Source - Filter Group
1. Data Source - select Filter Group. 2. Group - select the filter group to gather incident data from.
Data Source - Device
1. Data Source - select Device. 2. Device - select the device to gather incident data from.
Result - Integer
1. Result - select Integer - the number of incidents is always a whole number.
|
|
|
|
|