VRS Definition Groups

---

---

Overview The objective of the definition groups is to define the alarms, processes, counts and data fields that make up the report - according to the configuration.

---

---

Step 1. Select a template from the list - only reports that support definition groups will be shown.

---

Step 2. Select an existing definition group to edit or select the Add button.

---

Step 3. Overview of the options shown on the Available portion of the setup: Name - enter or edit the name of the group. Available - use select to choose the device from a group. Use Search to search for a device by name. Device - use the down arrow to select a device. Depth - select the depth of monitoring points to show. List - a list of monitoring points for the device will populate - select the monitoring point to add to the group. Type - check the types of monitoring points to show in the list.

---

Step 4. Overview of the options shown on the Included portion of the setup: Add - once a monitoring point is selected from the Available list, select the Add button to add it to the group (Included List). Remove - select a monitoring point from the included list and select the Remove button to remove it from the group. Descriptor - use the down arrow to select the type of descriptor to add the monitoring point to. A descriptor would be Production, Count, Downtime Reason, etc. List - depending on the type of descriptor selected, the list of included monitoring points will populate in the list.

---

Step 5. Example of a completed definition group for an Availability report.

---

---

---