Alarm Action Properties
|
After selecting to Add, Edit, Duplicate or Paste an Action - the Properties section will load. Alarms have 5 different options available.
Modify Discrete Output
|
This Action will allow the user to manipulate one of the Outputs on the device.
|
|
State - select the Alarm State that you want to trigger this action. There will be different States available depending on the Alarm you have selected (Set, Acknowledge, Clear).
|
Type - select Modify Discrete Output for this option.
|
Action - there are 3 options, Turn On, Turn Off & Blink. Select the action that fits the configuration.
|
Output - select the Output that you want use for this action. There will be 5 or 7 outputs available depending on the device type.
|
Modify Discrete Output on Another Device
|
This Action will allow the user to manipulate one of the Outputs on a device other than the one you are configuring. Generally this is used for a Wireless Light or Wireless Audio Device.
|
|
State - select the Alarm State that you want to trigger this action. There will be different States available depending on the Alarm you have selected (Set, Acknowledge, Clear).
|
Type - select Modify Discrete Output on Another Device for this option.
|
Action - there are 3 options, Turn On, Turn Off & Blink. Select the action that fits the configuration.
|
Device - select the device that you want to manipulate the output on.
|
Output - select the Output that you want use for this action. There will be 5 or 7 outputs available depending on the device type.
|
Modify Discrete Input
|
This Action will allow the user to manipulate one of the Inputs on the device.
|
|
State - select the Alarm State that you want to trigger this action. There will be different States available depending on the Alarm you have selected (Set, Acknowledge, Clear).
|
Type - select Modify Discrete Input for this option.
|
Action - there are 2 options, Turn On & Turn Off. Select the action that fits the configuration.
|
Input - select the Input that you want use for this action. There will be 4 inputs available.
|
Execute Task
|
This Action will allow the user to run a Connectivity Command. Generally these are used in Custom configurations, please contact VersaCall Support for assistance.
|
|
State - select the Alarm State that you want to trigger this action. There will be different States available depending on the Alarm you have selected (Set, Acknowledge, Clear).
|
Type - select Execute Task for this option.
|
Task - select the Build button to select a Command and to setup the required parameters.
|
Run Trigger
|
This Action will allow the user to run an AMS Trigger. Generally these are used in Custom configurations, please contact VersaCall Support for assistance.
|
|
State - select the Alarm State that you want to trigger this action. There will be different States available depending on the Alarm you have selected (Set, Acknowledge, Clear).
|
Type - select Run Trigger for this option.
|
Trigger - select the AMS Trigger that you want to run.
|
|
|
|