Count Properties
|
|
Sampler ID - assigned/created by VersaCall software.
|
Sampler Name - enter a name for the Count.
|
Mode - select Linked, Standard or Continuous depending on use.
|
Type - select Count for this example.
|
Trigger - As Occurs - record the count anytime one happens. Only used for counts the happen in 5 minutes or longer time spans.
|
Trigger - Periodic - record the count every X seconds. The time period is defined in the Period(s) field.
|
Period (s) - enter the number of seconds to elapse before recording the count. Will appear when Trigger - Periodic is selected.
|
Input - select the Discrete Input or Virtual Input setup for this count. This will only be required for a Count on a PSM or TIM.
|
Don't Send Zeros - select this so that a zero is not sent to the system when there is no count. This field will only appear when a Periodic Trigger is selected.
|
Color - select a color for the Count to appear on the touch screen.
|