Difference between revisions of "VT3000 - Install 2-Way Radio Module"
SupportAdmin (talk | contribs) (Created page with "=2-Way Radio Module= A 2-Way radio module can be purchased for your VersaCall system. This module will attach directly to the VersaCall computer/server using the LPT port and...") |
SupportAdmin (talk | contribs) |
||
| Line 9: | Line 9: | ||
'''3.''' Connect the Audio cable to the VersaCall computer/server. | '''3.''' Connect the Audio cable to the VersaCall computer/server. | ||
'''4.''' Open the VT3000 web interface - select Core Software - Administration - System Settings - Service. | |||
'''5.''' Select Audio Out tab. | |||
'''6.''' The following settings are needed to make the Radio module work with the system. | |||
'''a. Enabled''' - check mark the box to enable. | |||
'''b. Description''' - enter a name for the module. | |||
'''c. Driver''' - select one of the following options. | |||
'''i. Direct Audio''' - the audio will be played through the Audio Out port only. | |||
'''ii. Vertex Standard VX-4600''' - select when setting up an analog radio. | |||
'''iii. Motorola XPR 5000''' - select when setting up a digital radio. | |||
'''d. Port''' - select LPT1. | |||
'''7.''' Select Save & Exit once all settings have been made for the radio. | |||
'''8.''' The VT3000 Service must be restarted for the setting to take affect - [[VT3000 - Restart Service|'''Click Here''']] for instructions. | |||
'''9.''' Once the service has restarted you will need to test the radio channel - [[VT3000 - Test - Radio Channel|'''Click Here''']] for instructions. | |||
==Troubleshooting== | |||
If there is no sound playing on the radio channel, proceed with the steps below. | |||
'''1.''' Open the VT3000 web interface - select Core Software - Administration - System Settings - Service. | |||
'''2.''' Select Audio Out tab. | |||
'''3.''' Change the Port setting to LPT2. | |||
'''4.''' The VT3000 Service must be restarted for the setting to take affect - [[VT3000 - Restart Service|'''Click Here''']] for instructions. | |||
'''5.''' Test the radio channel again. | |||
'''6.''' | |||
Revision as of 20:26, 3 January 2018
2-Way Radio Module
A 2-Way radio module can be purchased for your VersaCall system. This module will attach directly to the VersaCall computer/server using the LPT port and Audio Out port. If your VersaCall computer/server does not have an existing LPT port, you will need to have one installed before proceeding. Please contact VersaCall Support for questions regarding this module.
Instructions
1. Mount the radio module cabinet within 6 feet of the VersaCall computer/server and within 6 feet of a 110 electrical outlet.
2. Connect the LPT cable to the VersaCall computer/server.
3. Connect the Audio cable to the VersaCall computer/server.
4. Open the VT3000 web interface - select Core Software - Administration - System Settings - Service.
5. Select Audio Out tab.
6. The following settings are needed to make the Radio module work with the system.
a. Enabled - check mark the box to enable.
b. Description - enter a name for the module.
c. Driver - select one of the following options.
i. Direct Audio - the audio will be played through the Audio Out port only.
ii. Vertex Standard VX-4600 - select when setting up an analog radio.
iii. Motorola XPR 5000 - select when setting up a digital radio.
d. Port - select LPT1.
7. Select Save & Exit once all settings have been made for the radio.
8. The VT3000 Service must be restarted for the setting to take affect - Click Here for instructions.
9. Once the service has restarted you will need to test the radio channel - Click Here for instructions.
Troubleshooting
If there is no sound playing on the radio channel, proceed with the steps below.
1. Open the VT3000 web interface - select Core Software - Administration - System Settings - Service.
2. Select Audio Out tab.
3. Change the Port setting to LPT2.
4. The VT3000 Service must be restarted for the setting to take affect - Click Here for instructions.
5. Test the radio channel again.
6.