VT3000 - Test - Radio Channel

---

---

Overview Once a Radio Channel has been added to the system, it can be tested to ensure the setup is correct.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. A Radio Module connected & installed on the computer (LPT Port). 3. Radio must be setup inside the VT3000 Core Software. 4. A Channel configured as an Output in the VT3000 Core Software.

---

---

Video

---

---

Step 1. Open the VT3000 web interface – select VT3000 Core Software - log in – select Communications. Communications

---

Step 2. Select Radio Channels in the Destination Type field.

---

Step 3. Select a channel to test - it will highlight.

---

Step 4. Deselect Text-To-Speech - select the “test123.wav” for the Audio File – select the Send button.

---

Step 5. Verify that the message can be heard over the handheld radio.

---

---

Select a Guide Here Add a Radio Channel to VT3000 How To Install a Radio Module Radio is Transmitting Audio Files are Not Playing

---

---