Difference between revisions of "VT3000 - Install BSC with IO"
Jump to navigation
Jump to search
SupportAdmin (talk | contribs) |
SupportAdmin (talk | contribs) |
||
| Line 26: | Line 26: | ||
|'''2.''' Attach Touch Screen to the mount using the included screws. | |'''2.''' Attach Touch Screen to the mount using the included screws. | ||
|- | |- | ||
| <em>[[ | | <em>[[File:Install_BSCWIO5.gif|border|400px]]</em> | ||
|} | |} | ||
Revision as of 15:28, 2 November 2018
Overview
If you have purchased a new BSC for your existing system please follow the steps below. If this is a new system, please ensure that you have the control unit installed with the coordinator operating normally.
Unpack
You will have the following components after unpacking.
Touch Screen
IO Module
Instructions
Select Expand to view a video for the step
| 1. Mount IO Module within 6 feet of an electrical outlet. |
|
| 2. Attach Touch Screen to the mount using the included screws. |
|
| 3. Mount the Touch Screen within 6 feet of an electrical outlet & within 20 feet of the IO Module. |
|
| 4. Find & Note of the Mesh Address on IO Module. - plug in IO Module & the Touch Screen. |
|
| 5. Plug in the IO Module & Touch Screen power. |
|
| 6. The IO Module & Touch Screen will automatically connect - verify Bluetooth connection on the Touch Screen. |
|
| 7. Open VT3000 Core Software select Diagnostics - select Device Status. |
|
| 8. Find the IO Mesh Address in the Address field - select Options link on the right. |
|
| 9. Select Configuration. |
|
| 10. Select a Device Configuration from the New Configuration field - select Update Configuration button. |
| border|400px |
| 11. Go to the Touch Screen - verify the correct module name shows in the top left corner. |
|
Step by Step Guides
Click Here for a guide on updating the configuration of a BSC, TIM or PSM.
Having Trouble?
Submit a Service Ticket