VT3000 Outputs

---

---

Overview Any device the VT3000 system has access to notify when an alarm/call is made from a device/module is considered an Output. All outputs must be setup before it can be added to a route. Outputs are limited to Pagers, Emails, Text Messages, Radio Channels, Phone Numbers and Output Groups.

---

Basic Functionality Add a Pager Add an Email Address Add a Cell Phone for Text Messages Add a Radio Channel Add a Phone Number for Voice Messages Add an Output Group Edit Output - select the output on the list that you want to edit - click on the Edit button. Delete Output - select the output on the list that you want to remove - select the Delete button. Copy Output - select the output on the list that you want to duplicate - click on the Copy button.

---

Pager Properties Use this type of output if the system has a paging transmitter attached and installed. VersaGold pagers are required, the user will need the Cap Code of each pager – a Cap Code is a 7-digit number found on a sticker placed on the back side of a VersaGold pager. If there is no sticker attached to the pagers use Click Here to access or program the Cap Code. Output ID - created/generated by the VersaCall software. Output Name - enter a name for the output. Cap Code - enter 7 digit Cap Code for the pager. Numeric - select to only send numbers - no characters.

---

Email Address Properties Use this type of output if the system has been set up to send emails. If you are not sure about email being setup, Click Here to check and/or setup email. Output ID - created/generated by the VersaCall software. Output Name - enter a name for the output. To Address - enter the recipients email address. Include Tagline - select to show date & time on email.

---

Text Message Properties Use this type of output if the system has been set up to send emails. If you are not sure about email being setup, Click Here o check and/or setup email. In order to setup the cell phone to receive messages, you will need the phone number (area code + number) and the service provider. Output ID - created/generated by the VersaCall software. Output Name - enter a name for the output. Phone Number - enter the recipients phone number. Provider - select the recipients cell phone provider.

---

Radio Channel Properties Use this type of output if the system has a Radio Module connected and functioning on the VersaCall system. Only the channel number is needed to setup this type of output. Output ID - created/generated by the VersaCall software. Output Name - enter a name for the output. Channel Number - enter the radio channel number. Number of Times to Replay - enter number for times message is to be repeated. Include Escalation Notification - select to broadcast escalation (level reached) messages.

---

Phone Number Properties Use this type of output if the system has a Phone Modem connected and functioning on the VersaCall system. The modem is connected to the system by USB. To setup this type of output you will need to know if the number is an Extension, PA System or Standard Phone Number. Output ID - created/generated by the VersaCall software. Output Name - enter a name for the output. Classification - select the Modify link to access the phone type setup. The step by step guide has information regarding what type of classification is required. Phone Number - enter the area code and phone number of the recipient.

---

Output Group Properties Use this type of output when you want to group multiple outputs. This feature also allows the user to setup a different availability time for the group rather than the individual output. Output ID - created/generated by the VersaCall software. Output Name - enter a name for the output. Members - select output(s) from the Available list - select the Add button Availability - Use Member Availability - use the outputs current availability. Availability - Override Member Availability - ignore the outputs current availability - set up a new availability for the group.

---

Availability Properties All output devices have an Availability selection. This is used to tell the system when the specific output can be activated. Not Available - system will not activate the output at anytime. Always - system will activate the output at all times without regard to day or time. During Specific Shifts - system will activate the output based on schedule & shifts selected.

---

---

---