VT3000 Routing

From Versacall Support
Revision as of 22:07, 23 August 2017 by SupportAdmin (talk | contribs)
Jump to navigation Jump to search

Routing

A route is a series of escalations/levels separated by time. Each of these escalations/levels can have specific outputs assigned to them. This allows you to stagger when specific people are notified about an alarm/call.

Basic Functionality



Route Properties

When selecting to Add, Edit or Copy a route, the Adding or Editing Route page will load. On this page there will be 2 tabs available that will help you to setup the route. The Properties tab allows you to setup basic funtionality.


Pager Settings.png


1. Route ID - assigned by VT3000 software.

2. Route Name - enter a name for the route.

3. Repeat Last Escalation - select to repeat any communications setup on the last escalation.



Route Escalations

The Escalation tab is used to add specific outputs to individual escalations/levels needed for the route. For information about setting up escalations see Adding a Route for more information.



Step by Step Guides

Adding a Route

Print Out a Route