Home - Repeater

---

---

A Repeater is used to extend the Mesh signal in areas where there may be interference or a long distance between modules. This device requires a standard 110VAC outlet.

---

---

Repeater

Requirements 110v power outlet within 6 feet of placement/location. Mounting location free of metal enclosures. Mounting location must be within 100’ to 300’ of the Coordinator or other Device that is communicating with the system/coordinator. Specifications Dimensions- 7” (W) x 5” (L) x 2.5” (H) (1) 6’ Power Cord (included) attached (1) 9” Antenna (included)

---

---

Select the appropriate link below for Instructions on Installation Instructions on Installing a Repeater

---

---

Select the appropriate link below for a How To Guide Instructions on how to Name/Configure a Repeater

---

---

---