Home - Repeater

• A Repeater is used to extend the Mesh signal in areas where there may be interference or a long distance between modules.
• This device requires a standard 110VAC outlet.

Requirements

• 110v power outlet within 6 feet of placement/location.
• Mounting location free of metal enclosures.
• Mounting location must be within 100’ to 300’ of the Coordinator or other Device that is communicating with the system/coordinator.

Specifications

• Dimensions - 7” (W) x 5” (L) x 2.5” (H)
• (1) 6’ Power Cord (included) attached
• (1) 9” Antenna (included)

Instructions on Installing a Repeater

Configuration

Add a Repeater Location

Type Subject or Key Word to Query Archives

---