Installation

Hardware Installation

This page will provide direction and links to hardware components that you need to install. Please start with section one and move down according to your set up.

Step 1

If you have just received a new VersaCall system, you will want to start with installing the VersaCall Computer or Control Unit.

There are 3 types of Control Units:

• 

  Mini Control Unit

• 

  Standard Control Unit

• 

  Rack Mount Control Unit

1. Click Here to view the step by step guide on installing a Mini Control Unit.

2. Click Here to view the step by step guide on installing a Standard Control Unit.

3. Click Here to view the step by step guide on installing a Rack Mount Control Unit.

Step 2

If you control unit is up and running, the next item to install is the Mesh Coordinator.

There are 2 types of Coordinator:

• 

  USB Coordinator

• 

  Remote Coordinator

1. Click Here to view the step by step guide on installing a USB Coordinator.

2. Click Here to view the step by step guide on installing a Remote Coordinator on the Same Subnet.

3. Click Here to view the step by step guide on installing a Remote Coordinator on a Different Subnet.

Step 3

If you purchased a paging transmitter, please use one of the guides below. If you did not purchase a paging transmitter, proceed to Step 4.

There are 2 types of Paging Transmitters:

• 

  USB Transmitter

• 

  Remote Transmitter

1. Click Here to view the step by step guide on installing a USB Paging Transmitter.

2. Click Here to view the step by step guide on installing a Remote Paging Transmitter on the Same Subnet.

3. Click Here to view the step by step guide on installing a Remote Paging Transmitter on a Different Subnet.