|
Path Name - enter a name for the Communications Path.
|
Route - select the Route to be used for the Communications Path.
|
Lag Time - enter the number of seconds to elapse before the Communications Path is initiated.
|
State - depending on the type of Alarm, there will be 1 to 3 States available (Set, Acknowledge, Clear).
|
Text Message - enter the text to be sent to all outputs on the route that accept text.
|
Use Audio File - select the box if an audio file is to be used for communications.
|
Audio File(s) - select the audio file to be played for the communication.
|
Escalate - select if the messages should continue to be sent until the alarm is cleared.
|