Difference between revisions of "VT3000 - Update Date/Time on Tablet"
SupportAdmin (talk | contribs) |
SupportAdmin (talk | contribs) |
||
| Line 2: | Line 2: | ||
If a tablet losses power and the internal battery goes completely dead, when power is established again the tablet date & time will reset to factory default. The steps below explain how to reset that Date & Time to the correct setting. | If a tablet losses power and the internal battery goes completely dead, when power is established again the tablet date & time will reset to factory default. The steps below explain how to reset that Date & Time to the correct setting. | ||
==Instructions | =Requirements= | ||
'''1.''' BSC, TIM or PSM powered and communicating with an IO module. | |||
=Instructions= | |||
'''1.''' Power on the tablet - select 3 white squares in the top right corner. | '''1.''' Power on the tablet - select 3 white squares in the top right corner. | ||
<gallery widths=400 heights=258> | |||
File:bluetest1.gif | |||
</gallery> | |||
'''2.''' Enter the PIN for the tablet select OK - contact VersaCall support if you do not know the PIN. | '''2.''' Enter the PIN for the tablet select OK - contact VersaCall support if you do not know the PIN. | ||
<gallery widths=400 heights=258> | |||
File:bluetest2.gif | |||
</gallery> | |||
'''3.''' Select Exit from the menu. | '''3.''' Select Exit from the menu. | ||
<gallery widths=400 heights=258> | |||
File:time3.gif | |||
</gallery> | |||
'''4.''' On the Android home screen select the Apps icon. | '''4.''' On the Android home screen select the Apps icon. | ||
<gallery widths=400 heights=258> | |||
File:time4.gif | |||
</gallery> | |||
'''5.''' Select the Settings icon in Apps. | '''5.''' Select the Settings icon in Apps. | ||
<gallery widths=400 heights=258> | |||
File:time5.gif | |||
</gallery> | |||
'''6.''' Select Date & Time from Settings. | '''6.''' Select Date & Time from Settings. | ||
<gallery widths=400 heights=258> | |||
File:time6.gif | |||
</gallery> | |||
'''7.''' Select Set Date. | '''7.''' Select Set Date. | ||
<gallery widths=400 heights=258> | |||
File:time7.gif | |||
</gallery> | |||
'''8.''' Use the calendar to set the correct date - select OK. | '''8.''' Use the calendar to set the correct date - select OK. | ||
<gallery widths=400 heights=258> | |||
File:time8.gif | |||
</gallery> | |||
'''9.''' Select Set Time. | '''9.''' Select Set Time. | ||
<gallery widths=400 heights=258> | |||
File:time11.gif | |||
</gallery> | |||
'''10.''' Use clock hand to set hour - select OK. | '''10.''' Use clock hand to set hour - select OK. | ||
<<gallery widths=400 heights=258> | |||
File:time9.gif | |||
</gallery> | |||
'''11.''' Use clock hand to set minute - select OK. | '''11.''' Use clock hand to set minute - select OK. | ||
<gallery widths=400 heights=258> | |||
File:time10.gif | |||
</gallery> | |||
'''12.''' Select the Home icon (Circle or House) at the bottom of the tablet. | '''12.''' Select the Home icon (Circle or House) at the bottom of the tablet. | ||
<gallery widths=400 heights=258> | |||
File:time15.gif | |||
</gallery> | |||
'''13.''' Select to use the VersaCall HMI - select Always if this option shows. | '''13.''' Select to use the VersaCall HMI - select Always if this option shows. | ||
<gallery widths=400 heights=258> | |||
File:time14.gif | |||
</gallery> | |||
| Line 72: | Line 103: | ||
=Step by Step Guides= | |||
[[VT3000_-_Test_-_Bluetooth_Signal_Strength|Test Bluetooth Signal Strength]] | |||
[[VT3000_-_Replacement_-_Touch_Screen|Replacing a Touch Screen]] | |||
=Having Trouble?= | |||
<gallery widths=150px> | |||
File:ticketicon.png|Submit a Service Ticket|link=VT3000_Home | |||
</gallery> | |||
Revision as of 18:31, 19 July 2019
Overview
If a tablet losses power and the internal battery goes completely dead, when power is established again the tablet date & time will reset to factory default. The steps below explain how to reset that Date & Time to the correct setting.
Requirements
1. BSC, TIM or PSM powered and communicating with an IO module.
Instructions
1. Power on the tablet - select 3 white squares in the top right corner.
2. Enter the PIN for the tablet select OK - contact VersaCall support if you do not know the PIN.
3. Select Exit from the menu.
4. On the Android home screen select the Apps icon.
5. Select the Settings icon in Apps.
6. Select Date & Time from Settings.
7. Select Set Date.
8. Use the calendar to set the correct date - select OK.
9. Select Set Time.
10. Use clock hand to set hour - select OK.
<
11. Use clock hand to set minute - select OK.
12. Select the Home icon (Circle or House) at the bottom of the tablet.
13. Select to use the VersaCall HMI - select Always if this option shows.
14. You will return to the BSC, TIM or PSM screen - the date will now be correct.
Step by Step Guides
Test Bluetooth Signal Strength
Having Trouble?
Submit a Service Ticket