VT3000 - Test - Radio Channel
Revision as of 22:56, 29 July 2020 by SupportAdmin (talk | contribs)
Overview
The instructions below explain how to test a Radio Channel that has been added to the VT3000 system.
Requirements
1. VT3000 Core installed and running on the system.
2. Radio module installed and configured in the VT3000 Core software.
3. A Radio Channel configured as an Output in the VT3000 Core software.
Instructions
1. Open the VT3000 web interface – log in – select Communications.
2. Select Radio Channel in the Destination Type field.
3. Select a channel - it will highlight.
4. Deselect Text-To-Speech - select the “test123.wav” for the Audio – select the Send button.
5. Verify that the message can be heard over the handheld radio.
Step by Step Guides
Radio is Transmitting Audio Files are Not Playing