Home - Computer Server

---

---

The Computer or Server can be a device provided by VersaCall or a device provided by the customer. The VT3000 software will be installed on this device. Any VersaCall Hardware will need to be attached to the device by a physical port or through a network connection.

---

---

Control Unit - Computer/Server

SERVERS: Built to the dimensions provided by the customer so that it can be mounted in an existing server rack.

NOTE: Control Units can vary in appearance. Overall dimensions should not exceed what is show above. Requirements 110v power outlet within 6 feet of placement/location. If the Control Unit is going to be connected to your network, an ethernet connection should be available within a reasonable distance from the placement/location. If the Control Unit is going to be connected to your network, a Static IP Address or a DHCP Reserved address must be setup. Mouse , Keyboard & Monitor are not included. These will be required during the initial setup. Specifications Dimensions - 10.5” (W) x 13” (L) x 4” (H) (1) 6’ Power Cord included (1) Ethernet Cable (not included) when connecting to your network.

---

---

Select the appropriate link below for Instructions on Installation VersaCall Provided Computer/Server Instructions on Installing a Mini PC Instructions on Installing a Standard PC Instructions on Installing a Rack Mount Server Customer Provided Computer/Server Minimum Computer/Server Requirements Software Installation Pre-Requisites Instructions on Installing SQL Server Express 2008 - 2016 Instructions on Installing SQL Server Express 2017 - 2019 Instructions on Adding required VersaCall Databases to an existing SQL Server Instance Instructions on Installing the VT3000 Software

---

---

Select the appropriate link below for a How To Guide General Information IT Considerations - System Architecture

---

---

---