VT3000 - Switch a PC Call Station

---

---

Overview If you using a PC Call Station there may be a need to switch the location/station over to a new or different one. This may happen when there is a new station added or the wrong station has been selected. This guide will show you how to get that switched over for the operator.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. PC Call Station plug in installed and licensed in the VT3000 Core Software. 3. A PC Call Station configuration setup in the VT3000 Software. 4. A PC Call Station configuration open on a computer or tablet.

---

---

Step 1. Go to the Computer or Tablet at the Station location. Open the PC Call Station as normal from the web browser.

---

Step 2. Select the Change link at the top of the interface near the name of the station.

---

Step 3. Select one of the Device Configurations in the list by clicking on it so that it is highlighted.

---

Step 4. Select the Use button at the bottom of the page.

---

Step 5. The page will load showing you the Call Station that you selected. You can now use the Call Station by clicking on one of the 1, 2, 3 or 4 buttons.

---

---

Select a Guide Here An Overview of Device Plug In Section Instructions on Installing a Device Plug In Changing/Switching the Configuration of a PC BSC Changing/Switching the Configuration on a PC Input Module Open/Use a PC BSC on a Computer or Tablet Open/Use a PC Call Station on a Computer or Tablet Open/Use a PC Input Module on a Computer or Tablet

---

---