VT3000 - Use/Open a PC Call Station

---

---

Overview If you purchased a PC Call Station, you will need to access the device from a web browser on the Computer or Tablet that is being used at the location/station. This guide will show you how to get that setup for the operator.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. PC Call Station plug in installed and licensed in the VT3000 Core Software. 3. A PC Call Station configuration setup in the VT3000 Software. 4. The IP address of the VersaCall computer/server.

---

---

Step 1. Go to the Computer or Tablet at the Station location. Select to open the web browser on the device. For a PC, we suggest Chrome or Edge. Chrome Edge

---

Step 2. Open a new tab type in the following URL into the Address Bar with your VersaCall Computer/Server IP address at the beginning. In our image below you will see 111.111.111 as our VersaCall Computer/Server IP Address, yours will be different. LINK - IP Address of the VersaCall Computer/Server/VT3000/Public/PCDevices.aspx

---

Step 3. After entering the web address hit your enter key. A web page will open showing you all the PC Devices that are available on your system.

---

Step 4. Select one of the Device Configurations by clicking on it so that it is highlighted.

---

Step 5. Select the Use button at the bottom of the page.

---

Step 6. The page will load showing you the Device Configuration that you selected. You can now begin to use the device.

---

---

Select a Guide Here An Overview of Device Plug In Section Instructions on Installing a Device Plug In Changing/Switching the Configuration of a PC BSC Changing/Switching the Configuration of a PC Call Station Changing/Switching the Configuration on a PC Input Module Open/Use a PC BSC on a Computer or Tablet Open/Use a PC Input Module on a Computer or Tablet

---

---