VT3000 - Install Wireless Tone Audio Module

Overview If you have purchased a new Tone Audio Module for your existing system please follow the steps below. If this is a new system, please ensure that you have the control unit installed with the coordinator operating normally.

Hardware Components (Tone) Wireless Audio Device

Requirements 1. The VT3000 Core Software installed and running on your system. 2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software. 3. An available plug on a 110V Outlet. Instructions Select EXPAND to view an Animated Graphic for the step. Step 1: Mount Module within 6 feet of electrical outlet. Step 2: Plug in the power cord to the electrical outlet. Step 3: Look at the bottom of the Audio Module - make note of the Mesh Address. Step 4: Open VT3000 Core Software select Diagnostics - select Device Status. Step 5: Find the Audio Module's Mesh Address in the Address field - select Options link on the right. Step 6: Select Configuration. Step 7: Select a Device Configuration from the New Configuration field - select Update Configuration button. Related - Step by Step Guides Instructions on Installing a Wireless Audio Module (MP3) Add a Wireless Audio Module (MP3) Configuration to VT3000 Core Software] Instructions on Replacing the MP3 Files/Songs on the Wireless Audio Module (MP3) Add a Wireless Audio Module (Tone) Configuration to VT3000 Core Software Instructions on Changing the Tone/Melodies from Default Instructions on Adjusting the Tone/Melody Volume Instructions on Configuring Devices to Play a Melody on a Wireless Audio Module (Tone/MP3) Additional Help Submit a Ticket - https://www.versacall.com/customer-support/service-ticket Training Videos - https://www.versacall.com/training