VT3000 - Adjust Volume - Audio Module

---

---

Overview Once you have a Tone Audio Module installed in your facility, you may need to adjust the volume either higher or lower.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software. 3. A Tone Wireless Audio Module powered and communicating with the VT3000 Core Software.

---

---

Step 1. The Tone Audio Module contains 2 parts - Horn/Tone Player & Wireless Controls Module. On the Horn you will see 4 screws on the back - remove those 4 screws.

---

Step 2. Once the screws are removed - slide the back cover off of the horn so to expose the interior.

---

Step 3. On the interior you will see a Volume dial in the top right corner.

---

Step 4. The Volume button is slotted - use a Screw Driver to turn the dial. Counter - Clockwise decreases the volume. Clockwise increases the volume. Generally the volume slot will be in the center or 12 o'clock position.

---

Step 5. Once you have adjusted the volume on the device, reverse the steps to replace the cover on the horn.

---

---

Select a Guide Here Instructions on Installing a Wireless Audio Module (MP3) Add a Wireless Audio Module (MP3) Configuration to VT3000 Core Software] Instructions on Replacing the MP3 Files/Songs on the Wireless Audio Module (MP3) Instructions on Installing a Wireless Audio Module (Tone) Add a Wireless Audio Module (Tone) Configuration to VT3000 Core Software Instructions on Changing the Tone/Melodies from Default Instructions on Configuring Devices to Play a Melody on a Wireless Audio Module (Tone/MP3)

---

---