Revision as of 17:50, 16 December 2021

Overview
If you have a need to check the 2-Way Radio settings or if a VersaCall Technician asks you provide the settings, the instructions below will show you have to find them.

Requirements
1. The VT3000 Core Software installed and running on your system.
2. A 2-Way Radio Module setup, powered and communicating with the VT3000 Core Software.

Instructions

Step 1.

Open the VT3000 web interface – select VT3000 Core Software - log in – select Administration – select System Settings - select Service.


Administration	System Settings	Service

Step 2.

Select the Audio Out tab.

Step 3.

You will see the following settings:

Enabled - check marked to indicate the device is being used.
Description - name of the device.
Driver - this will show one of the following - Vertex Standard VX-4600 or Motorola XPR 500.
Port - this will show one of the following - LPT1, LPT2 or DMA with port number.

Step 4.

After you have collected the information, ensure you select Discard & Exit so that no changes are made.

Related - Step by Step Guides
Install a 2-Way Radio Module
2-Way Radio Module Schematic of Components
2-Way Radio Wiring Schematic
Using a Phone Modem & 2-Way Radio Together
Test a the 2-Way Radio Module/Radio Channel
Add a Radio CHannel to Outputs in VT3000 Core Software

Additional Help
Submit a Ticket - https://www.versacall.com/customer-support/service-ticket
Training Videos - https://www.versacall.com/training

@@ Line 1: / Line 1: @@
-{|style="margin:left;"
+{|style="margin:auto;"
 |valign="top" |
 {|class="wikitable" style="background:#eaf3ff; width:800px"
@@ Line 8: / Line 8: @@
 |}
 |}
-{|style="margin:left;"
+{|style="margin:auto;"
 |valign="top" |
 {|class="wikitable mw-collapsible mw-collapsed" style="background:#eaf3ff; width:800px;"