| Overview
|
| If you have purchased a new MP3 Audio Module for your existing system please follow the steps below. If this is a new system, please ensure that you have the control unit installed with the coordinator operating normally.
|
|
| Hardware Components
|
 |
 |
 |
|
| I/O Module |
Speaker |
Speaker Power Cord |
Speaker Mount
|
|
| Requirements
|
| 1. The VT3000 Core Software installed and running on your system.
|
| 2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software.
|
| 3. 2 open plugs on 110V outlet.
|
|
Instructions
Select EXPAND to view an Animated Graphic for the step.
| Step 1: Mount Module within 6 feet of electrical outlet.
|
|
| Step 2: Mount speaker mount within 6 feet of an electrical outlet and within 6 feet of the IO Module.
|
|
| Step 3: On the backside of the Speaker, plug in the female end of the power cord.
|
|
| Step 4: On the backside of the Speaker, plug in the audio connector from the IO Module.
|
|
| Step 5: Plug the 3 prong connector (Speaker Power Cord) into the female connection on the IO Module. Plug the 3 prong connector on the IO module into an electrical outlet.
|
|
| Step 6: Plug the power cord from the IO module into an electrical outlet.
|
|
| Step 7: Note the Mesh Address on the IO Module.
|
|
| Step 8: Open VT3000 Core Software go to Diagnostics - Device Status.
|
|
| Step 9: Find the Audio Device Mesh Address in the Address field - select Options link on the right.
|
|
| Step 10: Select a Device Configuration from the New Configuration field - select Update Configuration button.
|
|
