Call Support at 858-677-6766 ext. 210
The Coordinator is the device that receives information from the devices on the plant floor.
|
The Coordinator communicates all information from the hardware devices to the VersaCall Software.
|
This device communicates with hardware devices over a 900MHz band. VersaCall refers to this as our Mesh Network.
|
Coordinators can be connected to the Computer/Server via USB port or over an Ethernet connection.
|
|
|
|
Coordinator - USB
|
Requirements
|
110v power outlet within 6 feet of placement/location.
|
Control Unit within 6 feet of placement/location.
|
Specifications
|
Dimensions – 3.5” (W) x 4.5” (L) x 1.5” (H)
|
(1) 6’ Power Cord (included)
|
(1) 6’ USB Cord (included)
|
(1) 7” Antenna (included)
|
|
|
|
Coordinator - Remote
|
Requirements
|
(2) 110v power outlets within 6 feet of placement/location (Coordinator & RS-232).
|
Coordinator & RS-232 within 6 feet of each other.
|
Ethernet port near the placement/location of the RS-232.
|
RS-232 will need to be assigned a Static IP Address or a DHCP Reserved address.
|
Specifications
|
Coordinator Dimensions – 3.5” (W) x 4.5” (L) x 1.5” (H)
|
RS-232 Dimensions - s" (W) x 3.25" (L) x .75" (H)
|
(2) 6’ Power Cords (included)
|
(1) 6’ Serial Cable (included)
|
(1) 7” Antenna (included)
|
(1) Ethernet Cable (not included)
|
|
|
|
Select the appropriate link below for Instructions on Installation
|
Select the appropriate link below for a How To Guide
|