VT3000 - Copy a PC Input Module Configuration

---

---

Overview When a new PC Input Module is added to your system and it has the EXACT same configuration of an existing PC Input Module, you can use the Copy function. This guide will explain how to duplicate and existing PC Input Module Configuration.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. The PC Input Module Plug-In must be loaded on your system. 3. At least 1 available PC Input Module License.

---

---

Step 1. Open the VT3000 web interface – log in - select Configuration - select Devices. Configuration Devices

---

Step 2. On the Devices page - select the Configuration you want to Copy/Duplicate so that it is highlighted.

---

Step 3. With configuration higlighted, click on the Copy button at the bottom of the Devices list.

---

Step 4. The Copy PC Input Module Configuration page will open. On the Properties tab, the Device Name of the configuration you selected to copy will show the field.

---

Step 5. Delete the Device Name - type in the name of the new station/location that you are creating.

---

Step 6. After the correct name has been entered, click on the Save & Exit button.

---

Step 7. The new PC Input Module Configuration will now appear in your Devices list.

---

Step 8. You will need to either view the PC Input Module on a new device or change an existing device to view the new PC Input Module. Click Here for instructions on how to view a new PC Input Module. Click Here for instructions on how to change the PC Input Module being used on an existing device.

---

---

Select a Guide Here Opening - Using a PC Input Module on your Device Send an Updated Configuration to an Existing/Configured PC Input Module

---

---