VT3000 - Setup Attached Light Stack - BSC TIM PSM

From Versacall Support
Jump to navigation Jump to search
Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
This guide explains how to setup the output connections to control a light stack that is attached/wired to a BSC, TIM or BSC IO Module. The example shown in the guide is for a 5 color light stack attached to a BSC, TIM or BSC IO Module. Regardless of how many lights you have in your stack, the instructions will be exactly the same.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software.
3. A BSC, TIM or PSM IO Module, with an attached Light Stack, powered and communicating with the VT3000 Software.
4. An existing BSC, TIM or PSM configuration.


Completion Steps
LightPart1.png LightPart2A.png LightPart3.png



InstructionHeader.png

Step 1.
Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Devices.
3137 1.png
3137 2.png
Configuration Devices



Step 2.
Select the Configuration of the BSC, TIM or PSM with the Light Stack attached from the list – select Edit.
PSMLts1.png



Step 3.
Select the Discrete Outputs tab.
PSMLts3.png



Step 4.
Select Discrete Output 1.
PSMLts2.png



Step 5.
Discrete Output Properties:
3137 7.png
Description – enter a name for the output – light color.
Type – Normal – output will turn on/off when commanded.
Inverted – output will do the opposite of normal.
Default State - what behavior the output will perform when it has no command.
On Delay – number of milliseconds to elapse before the output turns on.
Off Delay – number of milliseconds to elapse before the output turns off.
Blink On – number of milliseconds to stay on during blink.
Blink Off – number or milliseconds to stay off during blink.



Step 6.
Setup Discrete Output 1 as the Red Light. This is done because the Red Light is wired into O1 - wiring process completed in the first guide. If you have not wired the light stack into the I/O Module CLICK HERE for instructions.
3141 10.png
Description – enter Red Light.
Type – leave this as normal.
Inverted – leave this unchecked.
Default State - select Off.
On Delay – leave this as Zero.
Off Delay – leave this as Zero.
Blink On – leave this as 5.
Blink Off – leave this as 5.



Step 7.
Setup the Amber, Blue & White lights in the exact same manner using Outputs 2, 3 & 4 - only the Output Description will change. Examples of each light setup is shown below. Please use the Exact same order that we have shown below as this will match up with the way your IO Module has been wired.
3141 11.png
3141 12.png
3141 13.png



Step 8.
Select Discrete Output # 5.
PSMLts4.png



Step 9.
The Green light is setup to do the opposite of each of the other lights. For this reason, the Green light configuration is setup differently - we use a Related Type. The image below shows the options available for a Related Type:
PSMLts5.png
Description – enter a name for the output – light color.
Type – Related – output will turn on/off when another selected output is on/off.
Inverted – output will do the opposite of normal.
On Delay – number of milliseconds to elapse before the output turns on.
Off Delay – number of milliseconds to elapse before the output turns off.
Direct – output will do the exact same behavior as another selected output.
Inverse – output will do the opposite behavior as another selected output.



Step 10.
The image below shows you how to set up the Green light. Please use the same setup shown below as it will match up with the way you wired the device:
PSMLts6.png
Description – enter Green Light.
Type – select Related.
Inverted – leave this unchecked.
On Delay – leave this as zero.
Off Delay – leave this as zero.
Direct – leave these all unchecked.
Inverse – check mark DO1, DO2, DO3 and DO4. This tells the Green light to do the opposite of the other lights.



Step 11.
Select Save & Exit.
3141 15.png



Step 12.
If you have not configured the actions for the light stack on this device, move on to the next step in the process.
LightPart3.png



RelatedHowTos.png
Select a Guide Here
Attach & Wire a Light Stack to a BSC, TIM or PSM I/O Module
Configure an Attached Light Stack to be used with a BSC, TIM or PSM



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Setup_Attached_Light_Stack_-_BSC_TIM_PSM&oldid=10352"