VT3000 - Static IP Address (Control Unit) - Windows 10

From Versacall Support
Jump to navigation Jump to search
Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
These instructions are for the Windows 10 operating system. Under the Step by Step Guide section of this page there is a link to the Windows 7 & 8 operating systems. In order to access the VersaCall software from any computer on the network, the control unit must have an IP address assigned to it. If your control unit is NOT on your network, an assigned IP address is not required. Your IT department will need to issue a static IP address.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. An Assigned IP Address from IT.
3. The Subnet Mask for the Static IP Address.
4. The Default Gateway for the Static IP Address.
5. The DNS Server settings for the Static IP Address.



InstructionHeader.png

Step 1.
Click on the Windows Start button - select the Settings icon.
IP10 1.png



Step 2.
Select Network & Internet icon.
IP10 2.png



Step 3.
Select Ethernet.
IP10 3.png



Step 4.
Select the Change Adapter Options link on the right side of the window.
IP10 4.png



Step 5.
Double click the Ethernet connection that shows it is active (no red X).
IP10 5.png



Step 6.
Click on the Properties button.
IP10 6.png



Step 7.
Click on Internet Protocol Version 4 (TCP/IPv4) option so that it is highlighted - click on the Properties button.
IP10 7.png



Step 8.
Select the "Use the following IP address" option. Enter all the required information into the fields provided in the window - click on the OK button.
IP10 8.png



Step 9.
Close all the open windows related to the Network connection.



Step 10.
Open an Internet browser on another computer attached to the network - enter the IP address entered in step 8 – the VT3000 Welcome page will load if correct.
3124 7.png



Step 11.
If the VT3000 welcome page does not load, please contact VersaCall Support.



RelatedHowTos.png
Select a Guide Here
Hard Drive is Full on VersaCall Server/Control Unit
Cannot Log into Windows on VersaCall Server/Control Unit
Correct Settings when using Remote Desktop to Access the VersaCall Server/Control Unit
Configuring a Static IP Address for the VersaCall Server/Control Unit using Windows 7/8
Correct Firewall Settings for the VersaCall Server/Control Unit



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Static_IP_Address_(Control_Unit)_-_Windows_10&oldid=9579"