Category:Inputs
Jump to navigation
Jump to search
- Inputs deal with the 4 available input connectors found on the PSM I/O and a Switch Contact Module.
- These connections can accept wired contacts from your machinery which will turn the connection on, off or pulse.
- Using the VersaCall software we can configure what happens when that connection is either on, off or pulsed.
- The input can be setup as a Count (pulse) or an Alarm (on, off).
- Module can accept Dry Contacts or Voltage Contacts.
Keyword Search
Type Subject or Key Word to Query Archives |
---|
Pages in category "Inputs"
The following 9 pages are in this category, out of 9 total.
V
- VT3000 - Add a Continuous Count
- VT3000 - Add Contact Alarm - Dual State
- VT3000 - Add Contact Alarm - Tri-State
- VT3000 - Add Contact Alarm - Tri-State w/Reason on Acknowledge
- VT3000 - Add Process Count
- VT3000 - Add Wired Contact (Alarm)
- VT3000 - Add Wired Input (Count)
- VT3000 - Enable Disable an Input using a Process
- VT3000 - Wired Input Connection (IO Module)