VT3000 - Add Cell Phone (Text Message)

---

---

Overview Cell Phones being used to receive text messages, must be set up as Outputs. The SMTP server must be configured before messages can be sent. If the SMTP server has not been setup, see VT3000 - Setup - Email Server (SMTP) or contact VersaCall for further assistance.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. SMTP (Email Server) settings configured and working in VT3000 Core. 3. Complete phone number and cell phone provider.

---

---

Video

---

---

Step 1. Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Outputs. Configuration Outputs

---

Step 2. Select the Cell Phone icon in the Add New list.

---

Step 3. Cell Phone Properties: Output ID – assigned by the VT3000 software. Output Name – enter a name for the cell phone. Phone Number – enter the phone number without dashes/spaces. Provider" - click the down arrow for a list of the most common service providers. NOTE: If your provider is not listed, you will select Custom and type in the .com email address for the provider. Contact your provider if you do not know this information.

---

Step 4. Cell Phone Availability. Not Available – no messages will be sent to the phone. Always - messages will be sent 24 hours a day 7 days a week. During Specific Shifts - select the Schedule to be used - select the Shift(s) (check the box) the output is to receive messages during.

---

Step 5. Example - Verizon phone to receive messages for 3rd shift only.

---

Step 6. Click on the Save & Exit button to return to the Outputs page. When adding multiple phones, select Save & Add New. Select Discard & Exit to delete the phone entered and return to the Outputs page.

---

---

Select a Guide Here Test a Cell Phone (Text Message) SMTP (Email Server) Setup Instructions Print Out for Output(s)

---

---