VT3000 - Copy a PSM Configuration

---

---

Overview When a new PSM is added to you system and it has the EXACT same configuration of an existing PSM, you can use the Copy function. This guide will explain how to duplicate and existing PSM Configuration and assign it to a new location.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software. 3. An existing PSM configuration. 4. New PSM needs to be powered and communicating with the system.

---

---

Step 1. Open the VT3000 web interface – log in - select Configuration - select Devices. Configuration Devices

---

Step 2. On the Devices page - select the Configuration you want to Copy/Duplicate so that it is highlighted.

---

Step 3. With configuration highlighted, click on the Copy button at the bottom of the Devices list.

---

Step 4. The PSM Configuration page will open. On the Properties tab, the Device Name will show the same name plus (Copy) at the end.

---

Step 5. Delete the Copy Device Name - type in the name of the new station/location that you are creating.

---

Step 6. After the correct name has been entered, click on the Save & Exit button.

---

Step 7. The new PSM Configuration will now appear in your Devices list.

---

Step 8. You will need to send the configuration to the Call Station. Select a link to the type of Call Station you purchased. Click Here for instructions on how to send a configuration to a New PSM that has never been configured. Click Here for instructions on how to send a configuration to an Existing PSM that already has a configuration.

---

---

Select a Guide Here Send a Configuration to a New/Not Configured PSM Send an Updated Configuration to an Existing/Configured PSM

---

---