VT3000 - Install PSM with IO

---

---

Overview A PSM Module is made up of a Touch Screen & an I/O Module. Both pieces must have acces to 110VAC power and a mounting location that places them within 15 feet of each other.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. Coordinator connected and communicating with your VersaCall system. 3. PSM Module - Touch Screen & I/O Module. 4. Two available 110VAC outlets at the PSM mounting location.

Hardware Components

---

---

Step 1. Mount IO Module within 6 feet of an electrical outlet.

---

Step 2. Attach Touch Screen to the mount using the included screws.

---

Step 3. Mount the Touch Screen within 6 feet of an electrical outlet & within 20 feet of the IO Module.

---

Step 4. Find & Note of the Mesh Address on IO Module. - plug in IO Module & the Touch Screen.

---

Step 5. Plug in the IO Module & Touch Screen power.

---

Step 6. The IO Module & Touch Screen will automatically connect - verify Bluetooth connection on the Touch Screen.

---

Step 7. Open VT3000 Core Software select Diagnostics - select Device Status.

---

Step 8. Find the IO Mesh Address in the Address field - select Options link on the right.

---

Step 9. Select Configuration.

---

Step 10. Select a Device Configuration from the New Configuration field - select Update Configuration button.

---

Step 11. Go to the Touch Screen - verify the correct module name shows in the top left corner.

---

---

Select a Guide Here Install a Battery Powered Call Station Install a Powered Call Station Install a BSC Device Install a TIM Device

---

---