VT3000 - Install Call Station - Powered

From Versacall Support
Jump to navigation Jump to search
Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
Call Stations come as either Battery Powered or 110VAC Powered. This guide will explain how to install a 110VAC Powered Call Station.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. Coordinator connected and communicating with your VersaCall system.
3. Call Station Module.
4. Available 110VAC outlet at the Call Station mounting location.


Hardware Components
Call Station w/Power Cord



InstructionHeader.png

Step 1.
Mount the Call Station within 6 feet of an electrical outlet.
Install PCS1.gif



Step 2.
Connect the power plug to the outlet..
Install PCS2.gif



Step 3.
Inspect the LED cluster on the front of the Call Station - the Green LED blinking means a connection to the system has been established.
Install CS4.gif



Step 4.
Look at the bottom of the Call Station - make note of the Mesh Address.
Install CS3.gif



Step 5.
Open VT3000 Core Software go to Diagnostics - Device Status.
Install PSM7.gif



Step 6.
Find the Call Station Mesh Address in the Address field - select Options link on the right.
Install PSM8.gif



Step 7.
Select a Configuration from the New Configuration field - select Update Configuration button.
ConfigMaster1.gif



Step 8.
Inspect the LED cluster on the front of the Call Station - the Green LED blinking means the Configuration has been successful.
Install CS4.gif



RelatedHowTos.png
Select a Guide Here
Installation Instructions for a Battery Call Station
Add a Call Station Configuration
Update the Configuration on a Battery Call Station
Update the Configuration on a Powered Call Station
Update the Firmware on a Battery Call Station - Wireless
Update the Firmware on a Powered Call Station - Wireless
Update the Firmware on a Call Station - Manually
Install/Attach a Stack Light to a Call Station
Configure/Setup Light Stack on the Call Station Configuration
Setup the Use of the Light(s) on the Call Station Configuration
Change ISO Code on a Call Station using the # 1 - # 4 Buttons
Change ISO Code on a Call Station using the Micro SD Card
Change ISO Code on a Call Station using VT3000 Core Software Wirelessly
Perform a Coverage Test on a Powered Call Station
Perform a Coverage Test on a Battery Powered Call Station



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Install_Call_Station_-_Powered&oldid=9393"