VT3000 - Use Lights on Wireless Device

From Versacall Support
Jump to navigation Jump to search
Call Now 858-677-6766 SubmitTckBtn.png EmailUsBtn.png



GeneralHeader.png

Overview
When a Wireless Light Module is added to a system, other devices can trigger those lights to turn on, blink or turn off. Using these lights from other devices is setup in the Actions tab of an alarm or process.


Requirements
See Requirements Here
1. The VT3000 Core Software installed and running on your system.
2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software.
3. A Wireless Lights Module powered and communicating with the VT3000 Software.
4. At least one Call Station, BSC, TIM, PSM, PC Call Station, PC BSC or PC Input Modules Configuration setup in the VT3000 Software.



InstructionHeader.png

Step 1.
Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Devices.
3177 1.png
3177 2.png
Configuration Devices



Step 2.
Select a device that you want the Alarm/Call to turn on a light on a Wireless Light Module - select the Edit button.
3161 3.png



Step 3.
Select Monitoring Points tab.
3161 4.png



Step 4.
Select an Alarm or Process that you want to setup to manipulate a light on a Wireless Light Module.
3161 5.png



Step 5.
On the right side of the Monitoring Point Root - select the Actions tab in the Monitoring Point Properties.
3161 6.png



Step 6.
There will be 6 Icons available in the Toolbox:
3161 7.png
3161 8.png
3161 9.png
3161 10.png
3161 11.png
3161 12.png
Add Action Delete Action Duplicate Action Copy Action Paste Action Move Action



Step 7.
Select to Add a new action.
3161 30.png



Step 8.
Action Properties:
3161 13.png
State – select the state of the alarm/button to initiate the action.
Type – 3 options are available - we be using Modify Discrete Output on Another Device for this guide.
Action – select to Turn On, Blink or Turn Off the light.
Device – use the down arrow to select a wireless light module or other device.
Output – select the specific light to be manipulated by the action.



Step 9.
Example of a light setup for a Tri-State Alarm - each Alarm State is setup individually.
3161 14.png
Set Alarm State
3161 15.png
Acknowledge Alarm State
3161 16.png
Clear Alarm State



Step 10.
Using the same steps shown above, add any lights to alarms that is needed. Once you have setup everything up - select the Save & Exit button.
3175 16.png



Step 11.
The device will need to have the configuration updated.
CLICK HERE for instructions on updating a Call Station.
CLICK HERE for instructions on updating a BSC, TIM or PSM.



RelatedHowTos.png
Select a Guide Here
Instructions on Installing a Wireless Light Module
Add a Wireless Light Configuration to VT3000 Core Software



SearchHeader.png

 



VC Footer.png
Follow Us On LinkedIn View our Blog


Retrieved from "http://support.versacall.com/index.php?title=VT3000_-_Use_Lights_on_Wireless_Device&oldid=9660"