Overview
|
When using a PC Input Module a Count can be added to show as a button on the screen. VersaCall refers to this type of input as a Virtual Input or Virtual Count.
|
|
Requirements
|
1. The VT3000 Core Software installed and running on your system.
|
2. Software - PC Input Module plug in must be loaded in your system.
|
|
Video
File:Add Count to PC Input.mkv
Instructions
Step 1.
|
Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Devices.
|
|
Step 2.
|
Select the PC Input Module that you want to add the Count Button to from the list - select the Edit button.
|
|
Step 3.
|
Select the Virtual Inputs tab.
|
|
Step 4.
|
Select the Add Input (Plus) icon from the tool box.
|
|
Step 5.
|
Virtual Input Properties - Enter Count for the Description - select Count for the Type - ensure Enabled is check marked.
|
|
Step 6.
|
Select Save & Exit button.
|
|
Step 7.
|
Select the PC Input Module that you setup the Virtual Input on in the Steps above - select the Edit button.
|
|
Step 8.
|
Select the Monitoring Points tab.
|
|
Step 9.
|
Select the Add Process icon under the Monitoring Points tab if a process does not already exist.
|
|
Step 10.
|
Process Properties - setup the monitoring point as shown below:
Process Name - enter Work.
|
Mode - select Process.
|
|
|
|
Step 11.
|
With the Process Selected in the root - select the Add Sampler icon from the toolbox.
|
|
Step 12.
|
Sampler Properties - setup the monitoring point as shown below:
Sampler Name - enter Count.
|
Mode - select Linked Sampler.
|
Type - select Count.
|
Trigger - select As Occurs.
|
Input - select Count - this is the Virtual Input setup in the beginning of the guide.
|
Color - select default.
|
|
|
|
Step 13.
|
The Root should look like the image below.
|
|
Step 14.
|
Select Save & Exit button.
|
|
Step 15.
|
Example of what the Screen will display.
|
Not Active - press the Start Work/Process button to enable a count.
|
|
Active Count - press the Count button to add a count - press the End Work/Process button to disable the count.
|
|
|
|