Home - PC Input Module

Call Support at 858-677-6766 ext. 210

---

The PSM can accept Alarms, Data Fields, Processes, & Counts. All buttons can be configured inside the VT3000 Core Software. Alarms can be setup as Dual State, Tri-State or Mono-State. Data Fields can be added to Alarms or Processes. This module is used by entering a web address inside a web browser. A Computer or Tablet with a browser and network connectivity is required.

---

PC-Input Module

Requirements Computer or Tablet connected to the same network as the VersaCall Computer/Server. Must have a web browser that can accept a web address. System must have the PC-Input Module plug-in installed. PC-Input Module plug-in must be licensed. Specifications No Hardware is provided. A new/updated PC-Input Module license will be provided.

---

Select the appropriate link below for Instructions on Installation Instructions on Installing a PC Input Module Plug-In

---

Select the appropriate link below for a How To Guide Configuration - Alarm Add an Alarm button to your PC Input Module Add an Alarm with Reasons button to your PC Input Module Add an Alarm Label button to your PC Input Module Add Communications to your Alarm button Configuration - Data Field Add a Key Input Data Field Add a Static List Data Field Add a Shared List Data Field Configuration - Count Add a Count Button to your PC Input Module Configuration - Process Add a Process (Start Production/Job) button to your PSM Add a Data Field to a Process Add an Alarm to a Process General Use Opening - Using a PC Input Module on your Device Changing - Switching to a New/Different Station in your Browser

---

---