VT3000 - Add Process

---

---

Overview A Process is used to record a Start and Stop time. Generally this is used to record when a station/worker is in Production or running a Job/Job Order. This guide will cover how to add a Process without subordinate monitoring points. A Process can be added to the following device types BSC, TIM, PSM, PC BSC, & PC Input Module.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. Hardware: Coordinator must be setup, powered and communicating with the VT3000 Core Software. 3. Software - PC BSC or PC Input Module plug in must be loaded in your system. 4. Hardware - BSC or TIM plugin must be loaded in your system. 5. Hardware - BSC, TIM or PSM must be powered & communicating with the system.

---

---

Video

---

---

Step 1. Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Devices. Configuration Devices

---

Step 2. Select the Device that you want to add the Process from the list - select the Edit button.

---

Step 3. Select the Monitoring Points tab.

---

Step 4. Select the Add Process icon from the Monitoring Points toolbox.

---

Step 5. Process Properties: Process ID - assigned by VT3000 software. Process Name - enter a name for the Process. Mode - select Process.

---

Step 6. Once the Process has been setup - select the Save & Exit button to save the changes.

---

Step 7. The BSC, PSM & TIM module will have to be updated before the Data Field will appear on the screen. Click Here for instructions on updating the module.

---

---

Select a Guide Here Add a Process with a Data Field to a Device Add a Process with an Alarm to a Device Add a Process with a Count to a Device Enable/Disable an Input - TIM, PSM

---

---