VT3000 - Replace Paging Transmitter - USB

---

---

Overview A Paging Transmitter is used to send messages to individual Pagers. This guide will explain how to replace an existing transmitter. On occasion the paging transmitter can stop working or stop functioning properly.

Requirements See Requirements Here 1. The VT3000 Core Software installed and running on your system. 2. Physical access to the Paging Transmitter & VersaCall Computer/Server. 3. New Paging Transmitter hardware.

Hardware Components Paging Transmitter USB Cord Power Cord Antenna

---

---

Step 1. Unplug the Paging Transmitter Power Cord from the electrical outlet.

---

Step 2. Unplug the Power Cord from the Paging Transmitter.

---

Step 3. Unplug the USB Cord from the Paging Transmitter.

---

Step 4. Detach the Antenna from the Paging Transmitter.

---

Step 5. Remove the old Paging Transmitter.

---

Step 6. Place the New Paging Transmitter in the previous location.

---

Step 7. Attach the Antenna to the Paging Transmitter.

---

Step 8. Plug the Power Cord into the Paging Transmitter.

---

Step 9. Plug the USB Cord into the Paging Transmitter.

---

Step 10. Plug the Power Cord in the electrical outlet.

---

Step 11. Restart the VersaCall Service - Click here for Instructions.

---

---

Select a Guide Here Find the Paging Transmitter Properties/Settings Install a USB Paging Transmitter Install a Remote Paging Transmitter on the Same Subnet Install a Remote Paging Transmitter on a Different Subnet Test Paging Transmitter Coverage Programming a New Capcode on a Pager Add a Pager to Output in VT3000 Core Software

---

---