VT3000 - Add Pager

Overview Pagers that will be used to receive communications from VersaCall must be setup as Outputs.

Requirements 1. The VT3000 Core Software installed and running on your system. 2. A Salcom 12-62 UHF Transmitter connected & installed on the computer (USB or Remote/Ethernet). 3. Paging Transmitter must be setup inside the VT3000 Core Software. 4. The unique Capcode assigned to the Pager.

Instructions

Step 1. Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Outputs. Configuration Outputs

---

Step 2. Select the Pager icon from the Add New list.

---

Step 3. Pager Properties: Output ID – assigned by the VT3000 software. Output Name – enter a name for the pager. Capcode – enter the Capcode for the pager. Numeric - mark the box if you are only sending numeric pages (no other characters).

---

Step 4. Email Address Availability. Not Available – no messages will be sent to the output. Always - messages will be sent 24 hours a day 7 days a week. During Specific Shifts - select the Schedule to be used - select the Shift(s) (check the box) the output is to receive messages during.

---

Step 5. Example - pager for Maintenance available for 3rd shift.

---

Step 6. Click on the Save & Exit button to return to the Outputs page. When adding multiple pagers, select Save & Add New. Select Discard & Exit to delete the email entered and return to the Outputs page.

---

---

Related - Step by Step Guides Installing a USB Paging Transmitter Installing a Remote (Same Subnet) Paging Transmitter Installing a Remote (Other Subnet) Paging Transmitter Program or View a Pager Capcode Test Pager Coverage Print Out - Outputs	Additional Help Submit a Ticket - https://www.versacall.com/customer-support/service-ticket Training Videos - https://www.versacall.com/training