Data Field Name – enter a name for the data field - this will show on the touch screen as the title.
|
MODE - At Start - select to show the data field when the Process/Alarm is started.
|
MODE - During - select to show the data field when the Process/Alarm is active/running.
|
MODE - At End - select to show the data field when the Process/Alarm is ended.
|
Source Type – select Checklist.
|
Not Required – allows the operator to leave the field blank (no data).
|
Allow Modification Anytime – allows the operator to change the data at any time while the Process/Alarm is active.
|
STYLE - Checkbox - check box will show next to the item.
|
STYLE - Pass/Fail - a Pass and Fail option will show by the item.
|
STYLE - Pass/Fail/Nothing - a Pass, Fail or Nothing option will show next to the item.
|
REQUIREMENTS - None - operator is not require to make a selection.
|
REQUIREMENTS - Require Selection - operator must make a selection.
|
REQUIREMENTS - Require Pass - operator must select Pass for each item.
|
Source - select Shared List.
|
List - select the down arrow & select the shared list you want to use for this data field.
|