VT3000 - Add Wired Input (Count)

Overview The PSM and TIM have an I/O module that can accept a wired input from a machine. This input can be setup as a count. This guide explains how to setup the Discrete Input on the configuration. Once the Input has been setup you can use it as either a Continuous or Process Count. Before using this guide, a wired input must be pulled from the machine and wired into one of the Inputs on the I/O module.

Completion Steps

Requirements 1. The VT3000 Core Software installed and running on your system. 2. A Coordinator must be setup, powered and communicating with the VT3000 Core Software. 3. Switch Contact, TIM or PSM - the device must be powered and communicating with the system. 4. Contact Wire from your machine must be wired into one of the Inputs on the I/O (Part 1).

Instructions

Step 1. Open the VT3000 web interface – select VT3000 Core Software - log in – select Configuration – select Devices. Configuration Devices

---

Step 2. Select the Device that you wired your contact from the machine into the IO (Part 1) and setup the input on (Part 2) - select Edit.

---

Step 3. Select the Discrete Inputs tab.

---

Step 4. There are 4 inputs that can be configured – select the input that is wired for a count - text will be bold when selected.

---

Step 5. Input Properties - the Type field will be set to Disabled by default - select the down arrow - select Count from the list.

---

Step 6. Input Properties - select the options shown below: Type – Count will already be selected from previous step. Enabled - place a checkmark in the box to set the count as active (will receive input from the machine). Inverted - leave this option unchecked. If you have an inverted Count signal, please contact VersaCall support for further assistance. On Delay - leave this set to default (1). Off Delay - leave this set to default (1).

---

Step 7. Select Save & Exit button.

---

---

Related - Step by Step Guides Add a Count Button - BSC Add a Count Button - TIM, PSM Add a Count Button - PC Input Module Add a Continuous Count - TIM PSM Switch Contact Add a Count to a Process - TIM, PSM	Additional Help Submit a Ticket - https://www.versacall.com/customer-support/service-ticket Training Videos - https://www.versacall.com/training