Category:Alarms

Overview

Mono State

Operator selects the button and it is automatically set & cleared.

Dual-State

Operator selects the button once to Set the Alarm.

Operator selects the button a second time to Clear the Alarm.

Dual-State with Reason on Clear

Same operation as Dual State.

The Operator will be given a list of Reasons when selecting to Clear the Alarm.

Tri-State

Operator selects the button once to Set the Alarm.

Operator selects the button a second time to Acknowledge.

Operator selects the button a third time to Clear the Alarm.

Tri-State with Reason on Acknowledge

Same operation as Tri-State.

The Operator will be give a list of Reasons when selecting to Acknowledge the Alarm.

Tri-State with Reason on Clear

Same operation as Tri-State.

The Operator will be given a list of Reasons when selecting to Clear the Alarm.

Label

Available on BSC, TIM & PSM Modules.

Allows Alarms to be setup under a specific Group or Label.

Switch Contact - Dual-State

Available on TIM, PSM & Switch Contact Modules.

Alarm is linked to a wired input on the IO.

When the input is on the Alarm will be Set.

When the input is off the Alarm will be Cleared.

Switch Contact - Tri-State

Available on TIM, PSM & Switch Contact Modules.

Alarm is linked to a wired input on the IO.

When the input is on the Alarm will be Set & the Operator will have a button to Respond.

When the input is off the Alarm will be Cleared.

Switch Contact - Tri-State with Reason on Acknowledge

Available on TIM, PSM & Switch Contact Modules.

Alarm is linked to a wired input on the IO.

When the input is on the Alarm will be Set & the Operator will have a button to Respond.

On Responding, the Operator will be given a list of Reasons to select.

When the input is off the Alarm will be Cleared.

Keyword Search